Installation guide

9
8. Repeat steps 4-6.
9. Right click the first listed CyberSerial
Communication Port, click Update Driver
Software.
10. Repeat steps 4-6.
11. Right click the remaining CyberSerial
Communication Port, click Update Driver
Software.
12. Repeat steps 4-6.
13. The board is ready for use.
Windows 2000
1. At the Found New Hardware Wizard, click
Next.
2. Insert the driver CD.
3. Select Search for a suitable driver for my
device (recommended), and click Next.
4. Select CD-ROM drives, uncheck the other
boxes, and click Next.
5. Click Next, then click Finish.
6. Repeat steps 1-5 two times.
7. Restart Windows to complete installation.