Installation guide

13
Enable Digital CD Playback
Windows XP
1. Right click My Computer, click Manage, then
click Device Manager.
2. Double-click DVD/CD-ROM drives, then double
click your DVD or CD-ROM drive, then click the
Properties tab.
3. Check Enable digital CD Audio for this
CD-ROM device, then click OK.
4. If prompted, restart Windows. Otherwise, your
drive is ready for use.
FAQ
Q: Why is there no audio output after the driver is
successfully installed?
A: Please go to Control Panel, double click Sound or
Sound and Multimedia to check if the C-Media
High Definition Audio Device is selected as the default
audio output device.
If C-Media High Definition Audio Device is the default
audio output device, there will be a check beside
it.
If the C-Media High Definition Audio Device is not the
default audio output device then select it by
clicking on it, then click Set Default to set it as the
default device. See Figure 9.