Installation guide

Windows Server 2008 Installation (64-bit)

New Installation

1. Install the board and follow Microsoft procedures

to install Windows accordingly.

2. At Where do you want to install Windows?, click

Load Driver.

3. Insert the driver CD, click Browse.

4. Double click CD Drive... Drivers.

5. Double click 64bit folder:

For non-Itanium processors: select AMD64 folder, click

OK.

For Itanium processors: select IA64 folder, click OK.

6. Select Silicon Image SiI 3132... Controller, then

click Next.

7. Follow on-screen instructions to complete Server

2008 installation.

Existing Installation

1. Install the board and boot up Windows.

2. At the Found New Hardware window, select Locate

and install driver software (Recommended), then

click Don't search online.

3. Insert the driver CD.

4. Click Close to complete the installation.

To Verify Windows Server 2008 Installation

1. Right click Computer and click Manage.

2. Double click Diagnostics, select Device Manager.

3. Double click Storage controllers, and Silicon Image

SiI 3132... Controller should be displayed.