Installation guide

12
Windows Server 2008
1. Right click My Computer and click Manage.
2. Double click Diagnostics, select Device Manager
3. Double click Disk Drives, right click the target disk.
4. Click Uninstall. Click OK to confirm device removal.
5. You can now unplug or turn off the hard disk.
Assigning Drive Letter to an External Hard Drive
Most external hard drives come formatted and ready to
use, when connected a drive icon will show up in My
Computer and you can access the drive. However,
sometimes Windows will not automatically assign a
drive letter to a pre-formatted drive, in this case, the drive
icon will not show up in My Computer. If this happens,
follow the directions below to assign the drive letter.
These steps, written from Windows Server 2003, are
similar in all Windows versions.
1. Right click My Computer, click Manage, click Disk
Management, look for a Healthy disk without a
name and drive letter assigned to it, see Figure 3.
Figure 3: Disk Management