Installation guide

8
7. Follow on-screen instructions to complete Windows
Vista installation.
Existing Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware box, select Locate
and install driver software (Recommended), then
click Continue.
3. Insert the driver CD, click Don't search online.
4. Click Next, then Close.
5. Restart Windows to complete the installation.
Windows Vista (64-bit)
New Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do you want to install Windows?, click
Load Driver.
3. Insert the driver CD, then click Browse.
4. Double click CD Drive... Drivers.
5. Double click 64bit folder:
For non-Itanium processors: select AMD64 folder,
click OK.
For Itanium processors: select IA64 folder, click OK.
6. Select Silicon Image SiI 3132... Controller, then
click Next.
7. Follow on-screen instructions to complete Windows
Vista installation.
Existing Installation
1. Install the board and boot up Windows.