Installation guide

8. Press Enter to finish driver installation, then follow

the on-screen instructions to complete Windows

installation.

When Windows installation completes, go to SATARaid5

GUI on page 16 and install the RAID utility.

For An Existing Installation

1. Setup the RAID array prior to driver installation

and boot up to Windows.

2. At the Found New Hardware Wizard:

XP (w/SP1 or earlier)/Server 2003: continue to step #3

XP (w/SP2 or later)/Server 2003 (w/ SP1 or later): select

No, not at this time, then click Next.

3. Insert the driver CD, select Install the software

automatically (Recommended), and click Next.

4. Accept the default entry, then click Next.

5. Click Finish.

6. Repeat steps 2-5.

7. Click Yes to restart to complete the installation.

When Windows resumes, go to SATARaid5 GUI on

page 16 and install the RAID utility.

To Verify Windows 2000/XP/2003 Installation

1. Right click My Computer, click Manage.

2. Select Device Manager.

3. Double click SCSI and RAID controllers, and

Silicon Image SiI 3132 SoftRaid 5 Controller should

be displayed.