Installation guide

Capacity: Select from a list of RAID group sizes.

Chunk Size: Select one value from the available list.

Rebuild Priority: Select from the available list. RAID 0

and virtual disk do not require this. 10 is the highest level

of rebuild priority which means that rebuild times will be

faster but will take more CPU resources to rebuild.

Devices: Select RAID member devices from the available

device segment list.

Rebuild Legacy RAID Group

This command displays a dialog box to let the user

choose a replacement segment to rebuild a non-fault

tolerant legacy RAID group.

Delete Legacy RAID Group

This command displays a dialog box to let the user

choose legacy RAID groups to delete. This item is

disabled if no legacy RAID group exists.

Convert Legacy RAID Group

This command displays a dialog box to let the user

choose legacy RAID groups to convert to new RAID

groups of the same RAID type. This item is disabled if no

legacy RAID group exists.

Create/Delete/Convert Legacy Spare

These commands display a dialog box to let the user

configure a legacy spare. These features are not used

with the eSATA II PCIe Pro RAID.