User`s guide

32
Track Selector Repositioning
The Help incorrectly states that you can “Ctrl+drag the Track Selector
button to reposition tracks vertically in the Timeline.” This is not a
feature with Avid Xpress DV.
Connecting to Both a Transcoder and the Remote Output on a Deck
The following information is not included in the Help. When
simultaneously connecting your system to a transcoder and the
remote output on a deck, make sure that both devices are configured.
Each device will need a separate channel. If two channel
configurations do not appear by default in your Deck Configuration
dialog box, do the following:
1. In the Deck Configuration dialog box, click Add Channel.
2. Choose FireWire as your Channel Type and OHCI as your Port.
3. Click Add Deck, and configure the transcoder as explained in the
Help under “Configuring Decks.”
4. Click Add Channel again and choose Direct as your Channel Type
and COM1 or COM3 as your Port.
5. Click Add Deck, and configure the deck to which your remote
cable is connected as explained in the Help under “Configuring
Decks.”
Avid Xpress DV User’s Guide Change
The following information was omitted from the Avid Xpress DV User’s
Guide.
Chapter 10, “Managing Media Files,” should include the following
information about Refreshing Media Databases.