User`s guide

Release 3.5 Release Notes
30
2. Double-click Sounds and Audio Devices.
The Sounds and Audio Devices dialog box appears.
3. Click the Audio tab.
4. In the Sound Playback section, choose Sound Max Digital Audio from
the Preferred device pop-up menu.
5. Select “Use only default devices.”
6. Click OK.
➤
When you play a calibration tone to both the camera and the
consumer audio line (DV OHCI/1394) output, the frequency of the
tone heard on the consumer line will change.
Workaround: If you are calibrating the audio going to the DV OHCI/1394
line, listen to the output through the camera, rather than the consumer
audio line output.
To disable the output to the camera:
1. Click the Settings tab in the Project window.
The Settings scroll list appears.
2. Double-click Video Display.
The Video Display dialog box appears.
3. Deselect “Don’t send video to DV device (Client monitor disabled)”
option.
4. Click OK.
➤
You might experience excessive noise when connecting your computer
headphone output to outboard audio equipment, such as a studio
mixer or powered loudspeakers. This is due to the signal grounding
arrangement in both the external audio hardware and in the computer, and
is especially apparent on some laptop models.
Workaround: Use a ground-loop isolator, available at RadioShack
(part # 270-054), between the computer headphone output and the
outboard audio equipment.