User`s guide

Additional Notes on Operation
35
Workaround: Increase the amount of RAM, and then play the sequence a
second time. Make sure that your system is optimized for programs instead
of cache.
➤
You can’t use the L key for variable-speed play (3x or 4x) when the
Record tool is open.
➤
The Dell
®
330 system with an NVIDIA
®
display card installed plays
back a flash of distorted video periodically.
Project
➤
You might encounter a long delay when switching projects. This occurs
when your opened project is saved while in the Record toolset.
Workaround: Before closing your project, switch to a different toolset,
and then open the new project.
Recording
➤
You might hear noise and clicking after pausing the camera in the
Record tool. This is a problem with DirectShow
®
, but does not affect
recorded material
➤
The Panasonic
®
AG-DVC10 is not recognized by DirectShow.
➤
Recording across timecode breaks sometimes fails when you use a
transcoder.
➤
Video and audio might stutter during passthrough recording.
➤
Autosync with Source timecode does not work properly when you
record through a transcoder. The audio and video are out of sync.