Installation guide

10
To click the item of Read, the meaning is to load all
parameters as last time saving from the BT232 Config
Tool. The local address will be updated the real device
address at first time.
RS-232 Pin Assignment
The pin assignment scheme for a 9-pin male connector on
a DTE is given below
Pin1: X Pin 6: DTR
Pin 2: TXD Pin 7: CTS
Pin 3: RXD Pin 8: RTS
Pin 4: DSR Pin 9: DC 5V
Pin 5: GND
RS-232 Wiring Diagram
Serial Device SB-232 Converter
2 RX 2 TX
3 TX 3 RX
5 GND 5 GRN
4 DTR 4 DSR (Flow Control)
6 DSR 6 DTR (Flow Control)