Installation guide

BT RS232 Config Tool Installation & Setup

When setting up RS-232 to Bluetooth Converter for the first

time, you have to install and run BT1.exe as BT RS232

config tool first in your computer device. The utility CD

is enclosed in the device box. Before you use RS-232 to

Bluetooth Converter, you have to pair it with another E-

BT232 device.

The RS-232 to Bluetooth Converter must be configured first

before you use it. The purpose of configuration is to pair

two devices for an exclusive connection between them,

and pairing is done by utilizing Bluetooth address and

PIN code.

• Tool Installation

Figure 5

When setting up the RS-232 to Bluetooth Converter for the

first time, you have to install the utility software of BT

RS232 config tool in your computer first which is an

executable program in Windows environment. SB-232

config tool is used to detect and setup.