Installation guide

E. PIN Code

Device uses a PIN Code to identify during connecting

and communication.

F. Role

Role is for identifying the role of the device as a master

or slave. Select Master, for DTE mode, for Data Terminal

Equipment (such as a PCs). Select Slave for DCE mode,

for Data Communication Equipment (such as a Modem).

You can setup your serial device as what type of the

RS232 device you are going to connect in DTE or DCE

mode to work with it.

G. Discoverable

Allows or denies the device detection by other Bluetooth

devices.

H. Baud Rate

The baud rate range is 1200 bps-15.2K bps depends on

transmission distance and environment. Normally, the

default baud rate is set to 9600 bps N, 8 ,1.

I. Handshake (DSR/DTR)

The item of handshake is sat at the Disable item.

J. Stop Bit

The item of stop bit is sat at the One Bit item.

K. Parity

The item of parity is sat at the None item.