USB to Serial Adapter Hub (ID-SC0511-S1/ID-SC0611-S1/ID-SC0711-S1/ID-SC0811-S1) 1
Copyright Statement No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. Disclaimer Information in this document is subject to change without notice.
1. Introduction USB-to-Serial converter provides an easy solution connection serial port as needed for systems. USB-to-Serial functions as a converter between a USB port and standard serial ports. We can easily connect this converter to the USB port on your PC or USB hub and get access to any RS-232 devices such as PDAs, scanners, printers, etc. This device is suitable for portable devices, equipments, sales-end applications. Features Compliant with USB 2.
System Requirement IBM compatible computer or Mac Windows 2000, Windows XP, Windows Vista 32/64-bit, Windows 7, Mac 10.
2. Specifications 1xRS-232 (ID-SC0511-S1) 2xRS-232 (ID-SC0611-S1) Serial Ports 4xRS-232 (ID-SC0711-S1) 8xRS-232 (ID-SC0811-S1) DB9 male (ID-SC0511-S1/SC0311-S1/SC0411-S1) Connectors 8-pin RJ-45 (ID-SC0811-S1) FIFO Buffers ESD Protection Serial Communication Speed Interface Interface Connector 512 bytes 15 KV ESD 50 b/s ~ 921.6Kb/s USB 2.
USB to 1-port RS-232 Hub Hardware Dimension 100mm 6
Hardware Introduction 7
USB to 2-port RS-232 Hub Hardware Dimension 8
Hardware Introduction 9
USB to 4-port RS-232 Hub Hardware Dimension 10
Hardware Introduction 11
USB to 8-port RS-232 Hub Hardware Dimension 12
Hardware Introduction RJ45 to RS-232 Cable (ID-SC0811-S1 only) 13
RJ45 Pin Assignment 3. Installation On Windows 2000/ Windows XP/ Windows Vista / Windows 7 Note: DO NOT connect the Serial to USB Device to computer before installing the driver. 1. Please insert the provided CD into CD-ROM and click driver setup file to install.
2. Please click “Finish” to process driver installation. When the installation completed, please connect the USB to Serial Converter to available USB port.
Installation Verification To verify your installation, please launch Device Manager as following: Under Windows 2000/ Windows XP operating system: Right-Click My Computer and select Properties > System > (Hardware) > Device Manager. Under Windows Vista/ Windows 7 operating system: Right-Click My Computer and select Properties > Device Manager The High-Speed USB Serial Port should be displayed under the Ports (COM & LPT) group.
On Mac OS X Support Mac Driver Installation: Mac OS X v10.1 and later for PowerPC Mac Mac OS X v10.4 and later for Intel Mac Installation: 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of \Driver\Mac\Mac_OS X 10.x\/MCS7840InstallDisk 10.4 zip. Please extract the zip file first. 2. Please click “Continue” to install driver.
3. When the screen below appears, please choose the destination volume that you want to install and click Continue. 4. Please click “Install” to perform a basic installation.
5. Please enter your password as prompted. 6. Please select Continue Installation to install the software when the screen below prompted. 7. Please click Restart to reboot the Mac.
8. Please connect the device to available USB port to your Mac. 9. Installation Verification: Please key in “kextstat” to terminal bash. When above dialog box appears, it means the driver installation has been installed successfully.
Connect Serial Port Device Now you can connect your RS-232 device through the device.
Blank Page 22
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 3-year manufacturer warranty with this product.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.
