Installation guide

5
4. If you need the second parallel port, connect
the DB25 connector bracket now and
remove another slot bracket cover from an
available PCIe slot. Skip this step if you
need only one parallel port.
5. Carefully align the card to the selected PCIe
slot, push the board down firmly, but gently,
until it is well seated.
6. Replace the slot bracket holding screw to
secure the card.
7. Mount the second parallel port and secure
it with the slot bracket holding screw. Skip
this step if you need only one parallel port.
8. Replace the computer cover and reconnect
the power cord.
Software Installation
This section provides the steps on how to install
the DP CyberParallel Dual PCIe drivers. Please
make sure the board is installed before proceeding
with the driver installation.