Installation guide

ManualsBrandsSIIG Manualscomputer componentsJU-H42B22

Introducing the USB 2.0 4-Port Bay Hub

The USB 2.0 4-Port Bay Hub is designed to support USB

2.0 equipped PC computers. This USB 2.0 hub expands

USB connectivity to your computer.

Features and Benefits

• Compliant with USB Specifications, Revision 2.0

• Drive bay design adds ports to the front of your

computer for convenient device connection

• Fits into either 3.5" or 5.25" (with included mounting

rack) drive bay

• Provides 4 downstream ports for USB device

connections

• Supports high-speed (480Mbps), full-speed

(12Mbps), and low-speed (1.5Mbps) data transfer

modes

• Per port over-current detection and protection

• Supports simultaneous operation of multiple

high-speed USB 2.0 and USB 1.1 devices

• Hot-swapping feature allows you to attach/detach

USB devices without powering your computer off

Note: USB 1.1 devices are limited to USB 1.1

speeds even when they are connected to a USB 2.0

host adapter or USB 2.0 hub.

USB 2.0 4-Port Bay Hub

Quick Installation Guide

04-0252C

Summary of content (8 pages)

PAGE 1
USB 2.0 4-Port Bay Hub Quick Installation Guide Introducing the USB 2.0 4-Port Bay Hub The USB 2.0 4-Port Bay Hub is designed to support USB 2.0 equipped PC computers. This USB 2.0 hub expands USB connectivity to your computer. Features and Benefits • • • • • • • • Compliant with USB Specifications, Revision 2.0 Drive bay design adds ports to the front of your computer for convenient device connection Fits into either 3.5" or 5.
PAGE 2
System Requirements • • • PC computer with one available internal USB 2.0 port One empty 3.5" or 5.25" drive bay Windows 98 SE/ME/2000/XP (32-/64-bit)/Server 2003 (32-/64-bit)/Vista (32-64-bit) Package Contents • • • • • • USB 2.0 4-Port Bay Hub "Y" split power cable USB 2.0 cable 5.25" mounting rack Bag assorted holding screws Quick installation guide Hub Layout Important: The bay hub is shown in white in this manual. However, it is available in either black or white depending on the model purchased.
PAGE 3
5.25" Mounting Rack Assembly Important: Use the Mounting Rack Assembly only when installing the hub into a 5.25" drive bay. Figure 2. 5.25" Mounting Rack Assembly USB Cable Connectors Type A connector Type B connector Figure 3.
PAGE 4
Installing the USB 2.0 4-Port Bay Hub Important: In order for the USB 2.0 4-Port Bay Hub to work properly, the driver of your existing USB 2.0 host adapter has to have support for USB 2.0 hubs. 1. 2. 3. 4. Turn OFF the power to your computer and all connected peripheral devices. Unplug the power cord from the back of the computer. Remove the computer cover. Select an available 3.5" or 5.25" drive bay for the USB 2.0 4-Port Bay Hub, remove the cover plate from the selected drive bay.
PAGE 5
6. Connect the Type B connector of USB cable into the upstream port (root port) of the USB 2.0 4-Port Bay Hub. Figure 5. Connecting the USB 2.0 Cable 7. Carefully thread the two cables through the drive bay opening then push the hub assembly into the drive bay. Align the hub's screw holes with the appropriate holes in the drive bay, then carefully attach the hub to the case using the included mounting screws. Be careful not to overtighten the mounting screws. Mounting Screw Figure 6.
PAGE 6
8. Connect the Type A connector of the USB cable to the internal USB 2.0 port in your system. USB 2.0 Port Figure 7. Internal USB connection 9. Connect the power connector of the "Y" split power cable to the system power supply. 10. Replace the computer cover and reconnect the power cord, then turn the system on. 11. When Windows boots up, the USB 2.0 4-Port Bay Hub automatically gets detected and installed. The hub is now ready for device connection. 12.
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty.