User Manual

Features

• Supports IEEE 802.3az-2010

• Integrated 1000Mbps SX/LX transceiver

• Supports CDC-ECM

• Supports LPM (Link Power Management)

• Supports pair swap/polarity/skew correction

• Supports power down/link down power saving

• Supports hardware CRC

(Cyclic Redundancy Check) function

• SuperSpeed USB 3.0 ensures high performance

packet transfer rate

• Features full duplex with ow control and

half duplex with back pressure operation

System Requirements

1. An available USB 3.0 type-C port

2. Windows® 10 / 8.1 / 7 (32-/64-bit)

3. Windows® Server 2019 to 2008 R2 (32-/64-bit)

4. Mac OS X® 10.15 to 10.6

Dear Valued Customer

(JUST WANTED YOU TO KNOW)

WE REALLY

APPRECIATE

YOUR PURCHASE

~thank you~

PAGE 1
Features Dear Valued Customer (JUST WANTED YOU TO KNOW) WE REALLY APPRECIATE YOUR PURCHASE • • • • • • • Supports IEEE 802.3az-2010 Integrated 1000Mbps SX/LX transceiver Supports CDC-ECM Supports LPM (Link Power Management) Supports pair swap/polarity/skew correction Supports power down/link down power saving Supports hardware CRC (Cyclic Redundancy Check) function • SuperSpeed USB 3.
PAGE 2
Package contents • USB-C to SFP Gigabit Ethernet Adapte • Quick Start Guide Driver Installation 1. 2. 3. USB-C to SFP Gigabit Ethernet Adapter Please download driver from product page of SIIG website. Click “Setup.exe” to install the driver Follow the Installation steps to complete the driver Installation Quick Start Guide If your system has the built-in driver can use directly. driver install is not necessary. Support For more info or tech support http://www.siig.