User Manual

8
1. Install the board and follow Microsoft
procedures to install Windows accordingly.
2. At the Windows Setup screen, press F6 to
install the RAID driver.
3. When prompted, press S to specify the
location of the driver.
4. Insert the floppy disk, then press Enter.
5. Select Asmedia 106x SATA Controller
64bit, then press Enter.
Note: Do not remove the floppy diskette
from the floppy drive. You need to install
the driver once again during the
installation.
6. Press Enter again to finish the driver
installation, then follow the on-screen
instructions to complete your Windows
installation.
For Existing Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware window,
click Cancel.