Installation guide

3. Insert the driver CD, select Install the software

automatically (Recommended), then click Next.

4. Click Finish, remove the driver CD, shutdown

Windows, and setup your RAID array.

When Windows resumes, go to SATARaid5 GUI on

page 19 and install the RAID monitoring utility.

To Verify 2000/XP/Server 2003 Installation

1. Right click My Computer, click Manage, click

Device Manager.

2. Double click SCSI and RAID controllers, and Silicon

Image SiI 3114 SoftRaid 5 Controller should be

displayed.

Windows Vista

™

(32-/ 64-bit)

For A New Installation

1. Setup the RAID array prior to Windows installation.

2. Follow Windows installation procedure.

3. At Where do you want to install Windows?, click

Load Drivers.

4. Insert the driver CD, click Browse.

5. Double click your CD-ROM drive,

For 32-bit Windows Vista: click OK.

For 64-bit Windows Vista: select 64bit, then click OK.

6. Select Silicon Image SiI..., then click Next.

7. Follow the on-screen instructions to complete

Windows Vista operating system installation.

When Windows installation completes, go to SATARaid5

GUI on page 19 and install the RAID monitoring utility.