Installation guide

27
Resume: This command allows the user to resume the
suspended task items.
Cancel: This command allows the user to cancel the
selected task items.
Delete: This command displays a dialog box to let the
user delete the selected task items.
Event Log
This command displays the Event Log window. The
Event Log window displays SATA device-related events
that occur while SATARAID5 GUI is running. The Event
Log window has it's own menu bar. All options available
via the menu bar are shown below.
Sorting: This command displays a dialog box to the the
user choose up to 3 items to sort event items in the event
log.
Fields: This command displays a dialog box to let the
user choose which fields will be shown in the event log.
Resources
This command displays the Resources Information
window. This feature is for debugging purpose only.
Legacy Support Menu Command
Create Legacy RAID Group
This command displays a dialog box to let the user create
legacy (bootable) RAID groups. This item is disabled if
new RAID groups exist. The parameters are discussed
below.
RAID Group: Selects a group ID from the available list.
Configuration: Striped: for RAID 0; Mirrored: for RAID 1;
Contiguous: for single drive; Concatenated: for JBOD
(requires at least 2 hard drives)