Installation guide

4. Click on the Plus (+) sign next to the CD-ROM drive,

then double click the 64bit folder.

5. Highlight AMD64 (for 64-bit extended processors)

or IA64 (for 64-bit Intel Itanium processors), then

click Ok.

6. Select Silicon Image... SATALink Controller, then

press Next.

7. Follow the on-screen instructions to complete the

installation.

For Existing Windows Vista 64-bit Installation

1. Install the board and boot up Windows.

2. At the Found New Hardware Wizard, select Locate

and install driver software (recommended), click

Continue.

3. Insert the driver CD, click Next.

4. Click Close to complete the installation.

To Verify Windows Vista Installation

1. Right click My Computer and click Manage.

2. Click Continue, click Device Manager.

3. Double click Storage controllers, Silicon Image

SiI... Controller should be displayed.

Windows Server 2008 (32-bit)

New Windows 2008 Installation

1. Install the board and follow Microsoft procedures

to install Windows accordingly.

2. At Where do you want to install Windows?, click

Load Driver.

3. Insert driver CD, then click Browse.

4. Click CD Drive...Drivers, then click OK.