Installation guide

14
Existing Windows 2008 Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, select Locate
and install driver software (Recommended), then
click Don't search online.
3. Insert the driver CD. The driver will install
automatically.
4. Click Close.
5. Remove the driver CD and restart your Windows to
complete the installation.
Verify Server 2008 Installation
1. Right click Computer, click Manage, double click
Diagnostics, click Device Manager.
2. Double click Storage controllers, Silicon Image
SiI... Controller should be displayed.
Bios Configuration
The Serial ATA PCI BIOS will appear everytime your
system starts up. If the bios doesn't show, please install
your controller in another PCI slot. During this (Post)
process, the bios will show up and indicate the devices
attached to it.