Installation guide

1
Serial ATA PCI-M
Quick Installation Guide
04-0320C
Introducing the Serial ATA PCI-M
The Serial ATA PCI-M is an ultra high-speed dual channel
Serial ATA controller for use in Mac computers. It
achieves burst data transfer rates up to 150MB/s (1.5Gbps)
and supports various brand of hard disk drives with
capacities greater than 137GB.
Features and Benefits
Compliant with Serial ATA Specification, rev. 1.0
Compliant with PCI Specification, revision 2.3
Provides two independent channels to support up
to two Serial ATA drives
Features independent 256-byte FIFOs per channel
for host reads and writes
Co-exists with on-board controller
Can be used as the boot controller when a bootable
hard disk drive is attached
Supports 64/32-bit wide PCI slot at 33MHz
System Requirements
G3 (blue & white) or later with one available PCI slot
Mac OS X v10.1.x or later
Package Contents
Serial ATA PCI-M board
Serial ATA cable
Serial ATA power cable
This quick installation guide

Summary of content (8 pages)