Installation guide

9
5. Select your Optional speaker, click Next, select
your Full-range speakers, click Next.
6. Click Finish to save the settings.
Windows Server 2003
Make sure to log in as Administrator or an account with
administrative privileges.
1. From the main desktop click Start, Control Panel.
2. Click Sounds and Audio Devices.
3. Check Enable Windows Audio, click OK, then
restart Windows. Skip this step if not prompted,
then go directly to step 5. Otherwise, go to step 4.
4. When Windows resumes, repeat steps 1-2, then
continue with step 5.
5. Select the Audio tab.
6. Click Advanced under Sound Playback, then click
the Speakers tab.
7. Click the drop down box and select your speaker
type.
8. Click OK to save the settings.
Windows XP
1. From the main desktop, click Start, Control Panel.
2. Double click Sounds and Audio Devices.
3. Select the Audio tab.
4. Click Advanced under Sound Playback, then click
the Speakers tab.
5. Click the drop down list and select your speaker
type.
6. Click OK to save the settings.