Installation guide

ManualsBrandsSIIG Manualscomputer componentsUSB Over IP

Introducing the USB Over IP 1-Port

The USB Over IP 1-Port allows you to share USB devices

over TCP/IP networks.

Features and Benefits

• Supports Hi-Speed USB 2.0 ports

• Easy setup - no complicated IP address setting or

network configuration needed

• Connect up to 4 devices using an additional USB

hub (not included)

• Supports hot-swap of USB devices

• Easily setup an external HDD as a network media

server or a multi-function printer as a network

printer/scanner/fax server

System Requirements

• PC computer with an Ethernet connection

• Ethernet LAN with and available RJ45 connection

• Windows

2000/XP (32-/64-bit)/Vista (32-/64-bit)

Package Contents

• USB Over IP 1-Port

• AC adapter, 5V/12V (300mA)

• Driver CD

• This Quick Installation Guide

04-0542A

USB Over IP 1-Port

Quick Installation Guide

Summary of content (12 pages)

PAGE 1
USB Over IP 1-Port Quick Installation Guide Introducing the USB Over IP 1-Port The USB Over IP 1-Port allows you to share USB devices over TCP/IP networks. Features and Benefits • • • • • Supports Hi-Speed USB 2.
PAGE 2
Layout USB Port Network LED Power LED Network Port Reset Button Power Adapter Jack Figure 1: USB Over IP 1-Port Layout Hardware Installation Make sure that your USB devices are powered off and that the USB Over IP 1-Port's power adapter is disconnected. 1. 2. 3. Connect the USB Over IP 1-Port to a router or switch on your Ethernet network. Connect your USB device to the USB Over IP 1-Port. Connect the power adapter to the USB Over IP 1-Port.
PAGE 3
USB Over IP 1-Port Utility This utility must be running in order to use the USB Over IP 1-Port. Starting the USB Over IP 1-Port Utility To start the utility, double click the shortcut icon located on the desktop or go to the programs folder in which you installed the program and double click on the USB Over IP 1-Port icon.
PAGE 4
Status of Servers and Devices In addition to displaying all USB Over IP 1-Port servers and devices, the tree view also tells you the status of all the servers and devices that are accessible to you. A server is either accessible or inaccessible. An inacessible server will not show up on the tree view. An inaccessible server is either disconnected from the network, powered off or suffers other technical difficulties that prevent it from being accessed. Devices, however, have several kinds of status.
PAGE 5
Occupied by Others with Error When an error happens on the device connected to another user, you will see a small exclamation mark appear at the lower right corner of the red icon. This error could be an out-of-paper error if you are using a printer. Free with Error A green icon with an exclamation mark indicates that this device is not connected to anyone but has some type of problem, such as out of ink/paper. It is recommended that you get this problem solved before connecting to it.
PAGE 6
Click on File, Settings, Polling Interval on the control menu. In the next box, enter the time in seconds, and press Submit to save your changes.
PAGE 7
Server Configuration User Interface This web-based user interface (UI) allows you to configure the settings of the USB Over IP 1-Port via the computer's default web browser. Select the target server, in the tree view of the Main Dialog box, and click on the Config button. The system's default web browser will pop up and display the Device Status page similar to the image below. Menu Device Status Displays status of Server and devices.
PAGE 8
Network Displays network status of the USB Over IP 1-Port and provides access to network settings. From the Network Setting section, you can Enable/Disable DHCP support (default is Enabled), if your network does not have a DHCP server or it is disabled enter an IP Address and Subnet Mask (obtain from your network administrator), or change the Server Name. A password is not needed unless you have set a password. Reset Device Allows you to reboot the server.
PAGE 9
Factory Default Returns the USB Over IP 1-Port to factory default settings. A password is not needed unless you have set a password. Firmware Update Allows you to upload the latest firmware for the USB Over IP 1-Port. Click on the Browse button to browse to the location of the firmware on your PC, then click on the Submit button to update the firmware. A password is not needed unless you have set a password.
PAGE 10
Password Change Allows you to add or change the existing password. By default the USB Over IP 1-Port does not have a default password.
PAGE 11
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a 5-year manufacturer warranty with this product. Please see our web site for more warranty details.
PAGE 12
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCIe, PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty.