Installation guide

13
Driver Installation
This section provide the steps to install the driver
of DP RS422/485 PCI Adapter Card.
Windows 7 (32-/64-bit) / Server 2008 R2
1. Install the board and boot up Windows.
Note: Windows 7 will automatically search
preconfigured driver folders for the proper
driver, this process may take several minutes
to complete. Do not interrupt this process.
2. Insert the driver CD. Close AutoPlay if
prompted.
3. Click Start. In the Search programs and
files box, type D:\setup.exe, press Enter.
(Change D: to match your CD/DVD-ROM
drive letter)
4. Click Yes at the User Account Control
window if prompted. For 2008R2, skip this
step.
5. At the Welcome to the PLX OXuPCI952/
OXuPCI954 RS-422/485 Serial PCI Card
Setup window, click Install.