Installation guide

14
6. At the Completing the PLX OXuPCI952/
OXuPCI954 RS-422/485 Serial PCI Card
Setup window, select Reboot now, then
click Finish to complete the installation.
Windows Vista (32-/64-bit) / Server 2008
(32-/64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware window,
click Cancel for two times..
3. Insert the driver CD. Close AutoPlay if
prompted.
4. Click Start. In the Start Search box, type
D:\setup.exe, press Enter. (Change D: to
match your CD/DVD-ROM drive letter)
5. Click Allow at the User Account Control
window if prompted. For 2008, skip this
step.
6. At the Welcome to the PLX OXuPCI952/
OXuPCI954 RS-422/485 Serial PCI Card
Setup window, click Install.