Product Data Sheet

ManualsBrandsSika ManualsCaulk106711

PRODUCT DATA SHEET

Sikaflex® Self Leveling Sealant

HIGH PERFORMANCE, SELF-LEVELING,1-PART POLYURETHANE SEALANT

PRODUCT DESCRIPTION

Sikaflex® Self Leveling Sealant is a single component,

self-leveling, premium-grade polyurethane sealant with

an accelerated curing capacity. Meets Federal

Specification TT-S-00230C, Type 1, Class A. Meets ASTM

C-920, Type S, Grade P, Class 25.

USES

Sikaflex® Self Leveling Sealant is used to seal horizontal

expansion joints in concrete and cementitious slabs such

as:

Driveways▪

Garages▪

Sidewalks▪

Balconies▪

Pavements▪

Terraces▪

Warehouses▪

Factories▪

Civil Structures▪

Plazas▪

CHARACTERISTICS / ADVANTAGES

1-component, no mixing▪

Self-leveling, pourable▪

Accelerated curing▪

Permanently elastic▪

High durability▪

Resists aging, weathering▪

Excellent adhesion▪

Convenient, easy-to-use packaging▪

Paintable with water-based, oil-based or rubber-based

paints

▪

PRODUCT INFORMATION

Packaging

10.1 fl. (299 ml) oz. moisture proof composite cartridge, 12/case

29 fl. oz. (858 ml) moisture-proof composite cartridges, 12/case

Color

Gray in 10.1 fl. oz. (299 ml) and 29 fl. oz. (858 ml) cartridges.

Sandstone in only 29 fl. oz. (858 ml) cartridge

Shelf Life

12 months in original unopened packaging

Storage Conditions

Store at 40 to 95 °F (4 to 35 °C). Condition material to 65 to 75 °F (18 to 24 °C)

before using

Product Data Sheet

Sikaflex® Self Leveling Sealant

November 2018, Version 01.04

020515010000000008

1 /

Summary of content (4 pages)

PAGE 1
PRODUCT DATA SHEET Sikaflex® Self Leveling Sealant HIGH PERFORMANCE, SELF-LEVELING,1-PART POLYURETHANE SEALANT PRODUCT DESCRIPTION CHARACTERISTICS / ADVANTAGES Sikaflex® Self Leveling Sealant is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity. Meets Federal Specification TT-S-00230C, Type 1, Class A. Meets ASTM C-920, Type S, Grade P, Class 25.
PAGE 2
TECHNICAL INFORMATION Shore A Hardness 40 ± 5 (21 days) Tensile Strength 150 psi (1 MPa) (21 days) (ASTM D-412) Tested at: 73 °F (23 °C) 50 % R.H. Tensile Stress at Specified Elongation 110 psi at 100% (0.7 MPa) (21 days) (ASTM D-412) Tested at: 73 °F (23 °C) 50 % R.H. Elongation at Break 450 % (21 days) (ASTM D-412) Tested at: 73 °F (23 °C) 50 % R.H.
PAGE 3
Ambient Air Temperature 40 to 100 °F (4 to 38 °C). Sealant should be installed when joint is at midrange of its anticipated movement Substrate Temperature 40 to 100 °F (4 to 38 °C). Sealant should be installed when joint is at midrange of its anticipated movement Cure Time Final Cure: 3 to 5 days Tack Free Time 1 to 2 hours APPLICATION INSTRUCTIONS SUBSTRATE PREPARATION Clean all surfaces. Joint walls must be sound, clean, dry, frost-free, and free of oil and grease.
PAGE 4
Prior to each use of any product of Sika Corporation, its subsidiaries or affiliates (“SIKA”), the user must always read and follow the warnings and instructions on the product’s most current product label, Product Data Sheet and Safety Data Sheet which are available at usa.sika.com or by calling SIKA’s Technical Service Department at 1-800-933-7452.