TDS

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY

Mortar and concrete must be older than 28 days.

Substrate strength (concrete, masonry, natural stone)

must be verified. Pull-out tests must be carried out if the

substrate strength is unknown. The anchor hole must

always be clean, dry, free from oil and grease etc. Loose

particles must be removed from the holes.

Threaded rods and rebars have to be cleaned thoroughly

from any oil, grease or any other substances and

particles such as dirt etc.

MIXING

Getting the cartridge ready

1. Unscrew the cap

2. Cut the film

3. Screw on the static

mixer

4. Place the cartridge into

the gun and start

application

When the work is interrupted the static mixer can

remain on the cartridge after the gun pressure has been

relieved. If the resin has hardened in the nozzle when

work is resumed, a new nozzle must be attached.

Product Data Sheet

Sika® AnchorFix-2

February 2020, Version 01.04

020205010020000001

6 /