TDS

Sag Flow

Non-sag, even overhead

Product Temperature

Sika® AnchorFix-2 must be at a temperature of between 41 °F (5 °C) to 68 °F

(20 °C) for application.

Dew Point

Beware of condensation.▪

Beware of frost.▪

Open Time

Working & Loading Times

Cartridge

Temperature

T Work (minutes) Base Material

Temperature

T Load (hours)

Minimum 41°F - 14 °F to 32 °F* 24 hours

Minimum 41 °F - 32 °F to 41°F 180 minutes

41 °F to 50 °F 8 41 °F to 50 °F 100 minutes

50 °F to 68 °F 4 50 °F to 68 °F 70 minutes

68 °F to 77 °F 3 68 °F to 77 °F 40 minutes

77 °F to 86 °F 2 77 °F to 86 °F 40 minutes

86 °F 1 86 °F 40 minutes

T Work is the typical time to gel at the highest temperature in the range

T Load is the typical time to reach full capacity

* The design professional on the job is ultimately responsible for the interpretation of the data provided above.

Product Data Sheet

Sika® AnchorFix-2

November 2018, Version 01.03

020205010020000001

5 /