TDS

APPLICATION METHOD / TOOLS
Anchors in solid masonry/concrete:
Drilling of hole with an
electric drill to the diamet-
er and depth required.
Drill hole diameter must
be in accordance with an-
chor size.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole. (at least 2×)
Important: use oil-free
compressors.
The drill hole must be
thoroughly cleaned with
the special steel brush
(brush at least 2×). The
diameter of the brush
must be larger than the
diameter of the drill hole.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole (at least 2×).
Important: use oil-free
compressors.
The drill hole must be
thoroughly cleaned with
the special steel brush
(brush at least 2×). The
diameter of the brush
must be larger than the
diameter of the drill hole.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole (at least 2×).
Important: use oil-free
compressors.
Pump approx. twice until
both parts come out uni-
formly. Do not use this ma-
terial. Release the gun
pressure and clean the
cartridge opening with a
cloth.
Inject the adhesive into
the hole, starting from the
bottom, while slowly
drawing back the static
mixer.In any case avoid en-
trapping air. For deep
holes extension tubing can
be used.
Insert the anchor with a
rotary motion into the
filled drill hole. Some ad-
hesive must come out of
the hole.
Important: the anchor
must be placed within the
open time.
During the resin harden-
ing time the anchor must
not be moved or loaded.
Wash tools immediately
with Sika® Colma Cleaner.
Wash hands and skin thor-
oughly with warm soap
water.
CLEANING OF TOOLS
Tools must be cleaned as soon as possible with a clean
rag.
Product Data Sheet
Sika® AnchorFix-2
November 2018, Version 01.03
020205010020000001
7 /
8