MSDS

M A T E R I A L S A F E T Y D A T A S H E E T
Page 3 of 5
Sikadur® AnchorFix 1 - Part A
8. Exposure Controls/Personal Protection - Continued
Eye/Face
Protection
Safety glasses with side shields or goggles.
Skin
Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory
Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Expsosure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General
Protection
Wash thoroughly after handling.
Ingredient(s)
- Exposure Limits
SILICA, QUARTZ
ACGIH TLV-TWA 0.05 mg/m3 (Notice of Intended Change)
ACGIH TLV-TWA 0.025 mg/m3 (Proposed)
OSHA PEL-TWA 30/%SiO2+2 mg/m3
OSHA PEL-TWA 10/%SiO2+2 mg/m3
OSHA PEL-TWA 250/%SiO+5 mppcf
Ingredient CAS # 622-97-9 & 100-80-1 regulated as a member of the Generics group for CAS # 25013-15-4 VINYL
TOLUENE
OSHA PEL - 100 ppm (480 mg/m3) TWA
ACGIH TLV - 50 ppm (242 mg/m3) TWA
ACGIH STEL - 100 ppm (483 mg/m3) 15 minute
9. Physical And Chemical Properties
Appearance
White paste
Odor
Characteristic
Chemical Type: Mixture
Physical State: Solid
Melting Point: N/AV °F
Boiling Point: N/AV °F
Specific Gravity: 1.6
Packing Density: 13.5 lbs/gallon
S o l u b i l i t y : Insoluble
10. Stability And Reactivity
S t a b i l i t y : Stable
Hazardous Polymerization: Will not occur
Conditions
To Avoid (Stability)
Heat, sources of ignition.
Incompatible
Materials
Strong oxidizing materials, acids and bases.