Product Data Sheet

APPLICATION METHOD / TOOLS
Anchors in solid masonry / concrete
Drilling of hole with an
electric drill to the
diameter and depth
required. Drill hole
diameter must be in
accordance with anchor
size.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole. (at least 2x)
Important: use oil-free
compressors.
The drill hole must be
thoroughly cleaned with
the special steel brush
(brush at least 2x). The
diameter of the brush
must be larger than the
diameter of the drill hole.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole. (at least 2x)
Important: use oil-free
compressors.
The drill hole must be
thoroughly cleaned with
the special steel brush
(brush at least 2x). The
diameter of the brush
must be larger than the
diameter of the drill hole.
The drill hole must be
cleaned with a blow pump
or by compressed air,
starting from the bottom
of the hole. (at least 2x)
Important: use oil-free
compressors.
Pump approx. twice until
both parts come out
uniformly. Do not use this
material. Release the gun
pressure and clean the
cartridge opening with a
cloth.
Inject the adhesive into
the hole, starting from the
bottom, while slowly
drawing back the static
mixer.In any case avoid
entrapping air. For deep
holes extension tubing can
be used.
Insert the anchor with a
rotary motion into the
filled drill hole. Some
adhesive must come out
of the hole.
Important: the anchor
must be placed within the
open time.
During the resin hardening
time the anchor must not
be moved or loaded. Wash
tools immediately with
Sika® Colma Cleaner.
Wash hands and skin
thoroughly with warm
soap water.
CLEANING OF TOOLS
Tools must be cleaned as soon as possible with a clean
rag.
LIMITATIONS
THE NTSB HAS STATED THAT THIS PRODUCT IS
APPROVED FOR SHORT TERM LOADS ONLY AND SHOULD
NOT BE USED IN SUSTAINED TENSILE LOAD ADHESIVE
ANCHORING APPLICATIONS WHERE ADHESIVE FAILURE
COULD RESULT IN A PUBLIC SAFETY RISK. CONSULT A
DESIGN PROFESSIONAL PRIOR TO USE.
*The design professional on the job is ultimately
responsible for the interpretation of the data provided
on the product data sheet.
Product Data Sheet
Sika AnchorFix®-1
March 2020, Version 02.02
020205010010000001
7 /
8