TDS

ManualsBrandsSika ManualsAdhesives & Fortifiers1 Gal. Concrete Bonding Agent Primer

PRODUCT DATA SHEET

Sika® Level Primer

CONCRETE PRIMER FOR USE WITH SIKALEVEL SELF LEVELING UNDERLAYMENT

PRODUCT DESCRIPTION

Sika® Level Primer is a one-part, water-dispersed and

solvent-free, acrylic-based solution use to prime and seal

floor surfaces prior to the application of SikaLevel Under-

layment.

USES

Use as a primer/sealer for absorbent substrates includ-

ing concrete and cement screeds

▪

Particularly suitable as an adhesion promoter and sur-

face sealer beneath SikaLevel

▪

Underlayment enhancing the bond and integrity of the

underlayment when applied onto porous substrates

▪

CHARACTERISTICS / ADVANTAGES

Ready to use, no dilution required.▪

Water-based and solvent-free.▪

Penetrates substrate to reduce outgassing and forma-

tion of bubbles in the underlayment.

▪

Prevents water loss from the underlayment into the

substrate.

▪

Quick-drying and fast film formation to increase pro-

ductivity.

▪

Achieves excellent bond values throughout the recom-

mended range of application temperatures.

▪

Effectively seals concrete surfaces in a single, econom-

ic operation.

▪

PRODUCT INFORMATION

Packaging

1 U.S. gal. (3.8 L) jug

Shelf Life

12 months in original, unopened container. Protect from high heat and freez-

ing. Discard if frozen

Storage Conditions

Store dry between 40 °F to 77 °F (5 to 25 °C). Condition material to 65 to 75 °F

(18 to 24 °C) before using

TECHNICAL INFORMATION

Tensile Adhesion Strength

Pull-Out Strength 3/16” (5 mm) thickness

with Sika® Level > 290 psi (2 MPa)

(ACI 503)

APPLICATION INFORMATION

Coverage

Approximately 325 to 500 ft

/gal or 8 to 10 m

/L approximately. Coverage fig-

ures do not include allowance for surface profile and porosity or material

waste

Product Data Sheet

Sika® Level Primer

June 2018, Version 01.02

020815030010000004

1 /

Summary of content (4 pages)

PAGE 1
PRODUCT DATA SHEET Sika® Level Primer CONCRETE PRIMER FOR USE WITH SIKALEVEL SELF LEVELING UNDERLAYMENT PRODUCT DESCRIPTION CHARACTERISTICS / ADVANTAGES Sika® Level Primer is a one-part, water-dispersed and solvent-free, acrylic-based solution use to prime and seal floor surfaces prior to the application of SikaLevel Underlayment. ▪ Ready to use, no dilution required. ▪ Water-based and solvent-free. ▪ Penetrates substrate to reduce outgassing and formation of bubbles in the underlayment.
PAGE 2
Waiting Time / Overcoating Allow previous coats to become tack-free before applying additional coats Applied Product Ready for Use 2 hours, can be less APPLICATION INSTRUCTIONS MIXING SURFACE PREPARATION Before applying Sika® Level Primer, thoroughly shake the container in which the material is supplied to agitate the contents, ensure all solids are distributed throughout the dispersion and a uniform consistency is achieved.
PAGE 3
LIMITATIONS LEGAL NOTES ▪ For interior use only. Primer developed for SikaLevel Underlayment. ▪ Condition material between 65 °F to 75 °F (18 to 24°C) before using. ▪ Do not apply to substrates at temperatures below 50 °F (10 °C) as this will slow the drying and effectiveness of the primer. ▪ Do not apply where the relative humidity of the substrate exceeds 75 % as this will limit the efficiency of the primer.
PAGE 4
Sika Corporation 201 Polito Avenue Lyndhurst, NJ 07071 Phone: 800-933-7452 Fax: 201-933-6225 Sika Canada Inc. 601 Delmar Avenue Pointe Claire Quebec H9R 4A9 Phone: 514-697-2610 Fax: 514-694-2792 Sika Mexicana S.A. de C.V. Carretera Libre Celaya Km. 8.5 Fracc. Industrial Balvanera Corregidora, Queretaro C.P. 76920 Phone: 52 442 2385800 Fax: 52 442 2250537 SikaLevelPrimer-en-US-(06-2018)-1-2.pdf Product Data Sheet Sika® Level Primer June 2018, Version 01.