Installation Guide

Residential
Visit our website at usa.sika.com/retail 1-800-933-SIKA NATIONWIDE
Regional Information and Sales Centers. For the location of your nearest Sika sales oce, contact your regional center.
Sika Corporation Sika Canada Inc. Sika Mexicana S.A. de C.V.
201 Polito Avenue 601 Delmar Avenue Carretera Libre Celaya Km. 8.5
Lyndhurst, NJ 07071 Pointe Claire Fracc. Industrial Balvanera
Phone: [phone] Quebec H9R 4A9 Corregidora, Queretaro
Fax: [phone] Phone: [phone] C.P. 76920
Fax: [phone] Phone: [phone]
Fax: [phone]
KEEP CONTAINER TIGHTLY CLOSED. KEEP OUT OF REACH OF CHILDREN. NOT FOR INTERNAL CONSUMPTION.
For further information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual
Safety Data Sheets containing physical, ecological, toxicological and other safety related data. Read the current actual Safety Data Sheet before
using the product. In case of emergency, call CHEMTREC at 1-800-424-9300, International 703-527-3887.
Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product’s most current
Product Data Sheet, product label and Safety Data Sheet which are available online at http://usa.sika.com/ or by calling Sika’s Technical
Service Department at 800-933-7452. Nothing contained in any Sika materials relieves the user of the obligation to read and follow the
warnings and instruction for each Sika product as set forth in the current Product Data Sheet, product label and Safety Data Sheet prior to
product use.
SIKA warrants this product for one year from date of installation to be free from manufacturing defects and to meet the technical properties on
the current Product Data Sheet if used as directed within shelf life. User determines suitability of product for intended use and assumes all risks.
Buyer’s sole remedy shall be limited to the purchase price or replacement of product exclusive of labor or cost of labor. NO OTHER WARRANTIES
EXPRESS OR IMPLIED SHALL APPLY INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SIKA
SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE RESPONSIBLE FOR THE
USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS.
Sale of Sika products are subject Sika’s Terms and Conditions of Sale available at http://usa.sika.com/ or by calling 201-933-8800.
Limitations n Do not apply on frozen or frost covered substrates.
n Low temperatures or high humidity will extend curing time.
n Do not allow stored product to freeze
Safety Not a hazardous substance or mixture.
Wash skin thoroughly after handling. Use personal protective equipment as required. IF INHALED: Move to fresh air. IF
ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. If
eye irritation persists: Get medical advice/ attention. If skin irritation or rash occurs: Get medical advice/ attention. IF
exposed or concerned: Get medical advice/ attention. Take o contaminated clothing and wash before reuse.
PRIOR TO EACH USE OF ANY SIKA PRODUCT, THE USER MUST ALWAYS READ AND FOLLOW THE WARNINGS AND INSTRUCTIONS ON
THE PRODUCT’S MOST CURRENT PRODUCT DATA SHEET, PRODUCT LABEL AND SAFETY DATA SHEET WHICH ARE AVAILABLE ONLINE
AT HTTP://USA.SIKA.COM/ OR BY CALLING SIKA’S TECHNICAL SERVICE DEPARTMENT AT 800.933.7452 NOTHING CONTAINED IN ANY
SIKA MATERIALS RELIEVES THE USER OF THE OBLIGATION TO READ AND FOLLOW THE WARNINGS AND INSTRUCTIONS FOR EACH SIKA
PRODUCT AS SET FORTH IN THE CURRENT PRODUCT DATA SHEET, PRODUCT LABEL AND SAFETY DATA SHEET PRIOR TO PRODUCT USE.
Typical Data (Material and curing conditions @ 73°F (23°C) and 50% RH)
Shelf Life: 1 year in original, unopened containers
Storage Conditions: Store in cool, frost-free conditions with temperatures between 50°F to
90°F (10°C to 32°C).
Product Conditioning: Condition product to between 65°F to 75°F (18°C to 24°C).
Drying Time: 30 minutes to 1 hour (depending on humidity/temperature)
Colors: Concrete Gray
Direct Bond Strength (ACI 503 R): 228 psi (7 days)
Compressive Strength (ASTM C109): 1472 psi (1 hour)
1922 psi (1 day)
4027 psi (7days)
5537 psi (28 days)
Workability Time: 1 - 5 minutes
Intial Set: 5 - 10 minutes
Final Set: 10 - 20 minutes
RESULTS MAY DIFFER BASED UPON STATISTICAL VARIATIONS DEPENDING UPON MIXING METHODS AND EQUIPMENT, TEMPERATURE, APPLICATION
METHODS, TEST METHODS, ACTUAL SITE CONDITIONS AND CURING CONDITIONS.