Installation Guide

Ready-Mix Repair
How-To-Use
Materials:
• Safety glasses and gloves
• 1 qt. or 1 gal. tub of Sikacryl Concrete Patch
• Margin trowel or putty knife
• Wire brush
• Water & clean rag for clean up
Procedure
1. Make sure that all surfaces are clean, sound, dry and free
from dirt and loose particles.
2. For best results, use a wire brush to clean o any loose
particles or excess dirt or dust.
3. With the trowel or putty knife, stir material thoroughly until
a uniform appearance is achieved prior to use.
4. Ensure that enough product is pushed into crack or hole to
provide coverage. Tool as needed.
5. Areas greater than 1/4 inch deep may require two or more
applications.
6. Allow repaired area to fully cure for at least 24 hours mini-
mum.
7. Clean up all tools, spills, and excess material immediately
with water and clean rag after use.
Sikacryl
®
Concrete Patch