Specification

Safety Data Sheet
SikaAnchorFix®‐SPartA
Revision Date 03/10/2016 Print Date 03/10/2016
6 / 11
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use
process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure below any
recommended or statutory limits.
The engineering controls also need to keep gas, vapor or dust
concentrations below any lower explosive limits.
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
respirator complying with an approved standard if a risk
assessment indicates this is necessary.
The filter class for the respirator must be suitable for the
maximum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling
the product. If this concentration is exceeded, self-contained
breathing apparatus must be used.
Hand protection
Remarks : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is
necessary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Skin and body protection : Choose body protection in relation to its type, to the
concentration and amount of dangerous substances, and to
the specific work-place.
Hygiene measures : Avoid contact with skin, eyes and clothing.
Wash hands before breaks and immediately after handling the
product.
Remove respiratory and skin/eye protection only after vapors
have been cleared from the area.
Remove contaminated clothing and protective equipment
before entering eating areas.
9. P
hysical and chemical pr
operties
A
ppearance
:
liquid
Colo
r :
beige
Od
or :
aromatic
Odor Threshold : No data available
Flash point : ca. 88 °F (31 °C)
Ignition temperature : 914 °F (490 °C)