Specification

ManualsBrandsSikaflex ManualsBuilding materials10.1 fl. oz. Concrete Fix Sealant

PRODUCT DATA SHEET

Sikaflex® + Concrete Fix

ONE-COMPONENT, NON-SAG, POLYURETHANE SEALANT FOR SEALING CRACKS/JOINTS

PRODUCT DESCRIPTION

Sikaflex® + Concrete Fix is a moisture-cured, 1-compon-

ent, polyurethane-based, non-sag elastomeric sealant.

Meets Federal specification TT-S-00230C, Type II, Class

A. Meets ASTM C-920, Type S, Grade NS, Class 25.

USES

Designed for all types of joints and cracks where max-

imum depth of sealant will not exceed 1/2 in. (12.7

mm).

▪

Suitable for vertical and horizontal joints; readily place-

able at 40 °F (4 °C).

▪

Has many applications as an elastic sealant between

materials with dissimilar coefficients of expansion.

Ideal for:

▪

Weatherproofing of joints,cracks and gaps in concrete,

brickwork, blockwork, masonry, stucco and metal

frame

▪

Joints in walls, floors, balconies, around window or

door frames

▪

Expansion joints▪

Roofing▪

CHARACTERISTICS / ADVANTAGES

High elasticity – cures to a tough, durable, flexible con-

sistency with exceptional cut and tearresistance

▪

Stress relaxation.▪

Excellent adhesion – bonds to most construction ma-

terials without a primer

▪

Excellent resistance to aging, weathering▪

Non-staining▪

Urethane-based; suggested by EPA for radon reduction▪

Paintable with water-based, oil-based or rubber-based

paints

▪

Capable of ±35 % joint movement▪

Can be applied to green/new concrete 24 hours after

cure

▪

Can be applied on concrete that has been wet 1 hour

after water source has stopped

▪

PRODUCT INFORMATION

Packaging

10.1 fl. oz. (299 ml), moisture-proof composite cartridges, 12/case

Color

Limestone

Shelf Life

12 months in original unopenend packaging

Storage Conditions

Store at 40 to 95 °F (4 to 35 °C). Condition material to 65 to 75 °F (18 to 24 °C)

before using

Product Data Sheet

Sikaflex® + Concrete Fix

July 2018, Version 01.02

020511010000000075

1 /

Summary of content (4 pages)

PAGE 1
PRODUCT DATA SHEET Sikaflex® + Concrete Fix ONE-COMPONENT, NON-SAG, POLYURETHANE SEALANT FOR SEALING CRACKS/JOINTS PRODUCT DESCRIPTION CHARACTERISTICS / ADVANTAGES Sikaflex® + Concrete Fix is a moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Meets Federal specification TT-S-00230C, Type II, Class A. Meets ASTM C-920, Type S, Grade NS, Class 25. ▪ High elasticity – cures to a tough, durable, flexible consistency with exceptional cut and tearresistance ▪ Stress relaxation.
PAGE 2
TECHNICAL INFORMATION Shore A Hardness 40±5 Chemical Resistance Good resistance to water, diluted acids, and diluted alkalines. Consult Technical Service for specific data Resistance to Weathering Excellent Service Temperature -40 to 170 °F (-40 to 77 °C) (ASTM C-661) Tested at: 73 °F (23 °C) 50 % R.H. APPLICATION INFORMATION Coverage 10.1 oz (299 ml) Cartridge: Yield in Linear Feet Depth 1/4" Depth 3/8" Width 1/4" 24.3 3/8" 16.2 10.8 1/2" 12.1 8.1 3/4" 8.1 5.4 1" 1-1/4" 1-1/2" Depth 1/2" 6.1 4.
PAGE 3
LIMITATIONS ECOLOGY, HEALTH AND SAFETY ▪ Allow 1-week cure at standard conditions when using Sikaflex® + Concrete Fix in total water immersion and prior to painting. ▪ When overcoating with water-based, oil-based or rubber-based paints, compatibility and adhesion testing of mock-up installations is essential. ▪ Avoid exposure to high levels of chlorine. (Maximum continuous level is 5 ppm of chlorine.) ▪ Maximum depth of sealant must not exceed 1/2 in. (12.7 mm); minimum depth is 1/4 in.(6.3 mm).
PAGE 4
https://usa.sika.com/en/group/SikaCorp/termsandconditions.html or by calling 201-933-8300. Sika Corporation 201 Polito Avenue Lyndhurst, NJ 07071 Phone: 800-933-7452 Fax: 201-933-6225 Sika Mexicana S.A. de C.V. Carretera Libre Celaya Km. 8.5 Fracc. Industrial Balvanera Corregidora, Queretaro C.P. 76920 Phone: 52 442 2385800 Fax: 52 442 2250537 Sika Canada Inc. 601 Delmar Avenue Pointe Claire Quebec H9R 4A9 Phone: 514-697-2610 Fax: 514-694-2792 Sikaflex+ConcreteFix-en-US-(07-2018)-1-2.