Instructions / Assembly

DESCRIPTION
SPECIFICATION DATA
FEATURES
• Provides a more dirt and mildew resistant
finish than standard flat-finish stains
• Ideal for all vertical and especially for high-
traffic horizontal surfaces
• Water-repellent
• Exceptional UV resistance to slow color fade
• Self-priming on most bare or previously
coated surfaces
Rubbol Solid Wood Finish is a highly-protective
opaque finish with a low-luster sheen that hides
wood grain but accentuates texture. Available
in rich wood tones and complementary exterior
hues for use on a variety of exterior wood
surfaces.
Solid
Matte
Rubbol
®
Solid Wood Finish
SIK710
Color:
SIK710-100 White
SIK710-110 Light Base*
SIK710-120 Medium Base*
SIK710-140 Deep Base*
*Must be tinted before use.
Refer to the appropriate color formula book,
automatic tinting equipment, and or computer
color matching system for color formulas and
tinting instructions.
Clean-up Solvent:
Soap & Water
Resin:
Acrylic
Density**:
8.95 - 11.06 lbs/gal (1.07 - 1.33 kg/L)
VOC**:
<100 g/L (0.83 lbs/gal)
Solids**:
Volume - 30% - 40% +/- 1%
Weight - 36% - 55% +/- 1%
Practical Coverage:
Apply at 250-400 sq ft/gallon (6-10 m
2
/L).
Actual coverage may vary depending on the
type, age and texture of the wood and
application method.
Dry Time 77°F (25°C) & 50% RH:
To touch - 3 hours
To recoat - 4-6 hours
To light foot traffic - 24-48 hours
Wait 72 hours before replacing furniture.
Low temperature, high humidity or poor
ventilation will increase these times. Avoid
heavy abrasions immediately following
application
Shelf Life:
5 years maximum - unopened
Disposal:
Contact your local environmental regulatory agency
for guidance on disposal of unused product. Do not
pour down a drain or storm sewer.
**Data may vary with product color.
Read
Label and Material Safety Data Sheet Prior to Use. See other cautions on last page.
SHIPPING
Freight Classification:
DO NOT FREEZE
Packaging:
1 gallon (3.785 L)
5 gallons (18.925 L)
Flash Point:
None