User Manual

MAINTENANCE:
It is recommended to Test and visually inspect the CO alarm Once a
week. Replace CR123A Battery at least once a year to ensure proper
operation of all the CO5-SS functions. Make Note of the Replace CO
detector by Date. CO detector has a life span of six years max.
Occasionally clean the outside casing with a clean dry cloth. Ensure that
the holes on the front of the alarm are not blocked with dirt and dust.
Do not paint, and do not use cleaning agents, bleach, or polish on the
detector.
IMPORTANT: REGULAR TESTING IS RECOMMENDED.
DETECTOR REPLACEMENT
This detector is manufactured with a long-life carbon monoxide sensor.
Over time the sensor will lose sensitivity, and will need to be replaced
with a new carbon monoxide detector. This detector’s lifespan is ap-
proximately six years from the date of manufacture.
The user should periodically check the detector’s replacement date.
Remove the detector from its base and check the replacement date label
on the underside of the detector. The label indicates the date that the
detector should be replaced.
NOTE: The detector will also cause a trouble condition once it has
reached the end of its useful life. If this occurs, it is time to replace the
detector.
NOTE: Before replacing the detector, test unit to Silent Call receiver to
ensure proper operation.