User Manual

IMPORTANT: The range and proper operation of any wireless device

will vary depending on its surroundings. It is very important that each

CO5-SS detector is tested with each receiver intended for alarm.

Detector Description

• LIsted to UL Standard 2034

• CO sensitivity is evaluated to UL 2034

• Local sounder

• Dual LED’s

• Test/Hush button

• Functional Gas Test

• Surface mount to wall or ceiling

• Optional drywall anchors included

The CO5-SS contains a piezoelectric horn which generates the ANSI

S3.41 temporal 4 pattern in an alarm condition (see note below Table

1 for temporal 4 pattern). In alarm, a message is also sent to a pro-

grammed Silent Call Receiver. The alarm message is transmitted every

4 seconds until the carbon monoxide condition has cleared and the de-

tector has reset. During an alarm condition, pressing the detector’s test

button will silence the piezoelectric horn for ﬁ ve minutes. The mounting

base installation is simpliﬁ ed by the incorporation of features compat-

ible with drywall fasteners or other methods that provide a method for

securing the detector in place.

Two LEDs and a sounder on the detector provide local visual and audi-

ble indication of the detector’s status as listed in Table 1.