User Manual

9
31. Exit Alerts page to view My Gateways page.
32. The GW1000 is now ready to be “PAIRED” with your Silent Call Signature series Transmitters.
33. Pairing of the GW1000 can be done on the WEB page by selecting “PAIR” or manually by momentarily pushing
the pair button located on top of the Linx Box.
34. Identify each of the Silent Call Signature Series transmitters and Codes you wish to PAIR with the GW1000.
• If all your transmitter equipment is set to the same address, only one transmitter will need to be paired.
• You will need to PAIR each Transmitter that has a different Address code. Reference the Transmitter
Instruction sheet for selecting different addresses.
35. Once you select “PAIR” you have approximately 30 SECONDS to activate the transmitter using test button or
alert sensor. Activity Blue light will flash to indicate unit is in PAIR Mode.
36. You will receive a text message within approximately 10 seconds on the Primary Phone indicating Alert was
received.
37. You can now log out and access your account and profile at any time.
38. WEB page Manage Gateway Tab will keep a history of received alerts and times for your review.