Specifications

Model 5700 Installation and Operation Manual

7-32 151295

7.6.3.1 Trouble Events

You can map certain system trouble events to an output group. To access the screen for

selecting output groups and cadence patterns for system trouble events.

6. Press for Trouble Events. A screen similar to the one in Figure 7-14 will display.

Select a group and a cadence pattern for each event as needed for your application. The U:

field is for a user-specified trouble condition. You can program an output group and

cadence pattern for any of the following events:

Figure 7-14 System Trouble Event Mapping Example

Battery Low battery condition.

Gnd Flt Ground fault.

Phone Ln Phone Line 1 or 2 trouble.

Account Account trouble; cannot report to account.

Printer Printer trouble. (Currently not supported; do not select.)

Aux Pwr Auxiliary power trouble.

Sys Sw Trouble with a system switch.

Group Tr Trouble with an output group.

SBUS Com SBUS communication trouble.

SBUS Pwr SBUS power trouble.

SLC Loop Trouble on the SLC loop.

AC Loss AC power lost.