System information

System Operation

151295 8-7

5. A screen similar to those shown in Figure 8-3 will display.

Figure 8-3 Checking Detector Sensitivity Compliance

If a printer is attached to the system (via a Module 5824 Serial/Parallel Interface), you can

print detector status (see Section 8.3.16).

8.3.11 View Status of a Point

1. From the Main Menu, select for Point Status.

2. From the list that displays, press to select the module where this point is located. The

screen that displays will show you if the point has a trouble and will provide sensitivity

compliance information. (See Section 8.3.10 for complete information about detector sen-

sitivity compliance.)

8.3.12 View Alarms or Troubles

When the system is in alarm or trouble, you can press to view the location of an alarm or

trouble. See Section 8.3.12 for more information.

8.3.13 View System Information

Press from the Main Menu to view the panel model and serial number and system version

number and date. The information displays for several seconds then returns to the main menu.

8.3.14 Reset dialer

From the Main Menu, select . The LCD will display “Dialer reset in progress...” You will

be returned to the Main Menu when the reset is completed.