Instruction Manual
Model 5128/29 Fire Slave Communicator Installation Manual
2 150805
1.2 Optional Devices
The following accessories are available for use with the Model 5128/29:
• 5230 Remote Annunciator for programming, troubleshooting, and system operation. Only one model 5230
can be used.
• Cable for 5230, P/N 130294.
• 5541 Downloading Software for remote programming. (Must be Revision 3.7 or later.)
• 5530 Modem. Required if the 5541 downloading software is used.
1.3 UL Fire Listed Receivers Compatible with the 5128/29
The following UL Listed receivers are compatible with the 5128/29:
1.4 How to Use this Manual
This manual is intended for use with Revision P or higher of the 5128/29 printed circuit board. If you are
installing or servicing a different revision level and do not have the correct manual, contact Silent Knight for
the correct information.
In this manual, a rectangle represents a key that you press if you are using the optional Model 5230 Remote
Annunciator. For example, “Press ” means “Press the <ENTER> key.”
RECEIVER FORMATS
Silent Knight Model 9000, 9500, or 9800
Note: The Model 9000 receiver does not
accept CID format.
BFSK14
BFSK23
SK 3/1
SK 4+2
SIA8
SIA20
Contact ID (CID)
Osborn & Hoffman Quickalert SK 3/1
SK 4+2
SIA8
SIA20
BFSK14
BFSK23
Ademco 685 SK 3/1
SK 4+2
FBI CP220 SK 3/1
SK 4+2
Radionics D6500 BFSK 1400
BFSK 2300
ENTER