Full Product Manual

W
A
R
R
A
N
T
Y
25
YEAR
COSENTINO PRODUCT GUIDE
Sintered Particle
Technology
Dekton® uses an exclusive SPT in its manufacturing,
capable of sintering mineral particles, bonding them
together and compacting their internal structure. This
innovative technological process mimics and accelerates
the processes that natural stone undergoes when exposed to
high pressures and temperatures for millenia.
Dekton® emulates in a few hours what nature takes millennia
to do, thanks to the exclusive SPT technology.
→ The furnace has a length of 180 meters (196 yards).
→ Temperatures reach approximately 1250ºC (2300ºF).
→ Total processing time depends on the thickness of the
slab
(about 4 hours).
Safety in facades
and cladding
In order to reinforce safety in ventilated facades and interior
cladding, there is the possibility of adhering a safety mesh
behind the Dekton® slab, specially developed to prevent falls
due to breakage. It is a 300 g/m2 fiberglass mesh adhered
to the material with epoxy resin. Safety is one of Cosentino’s
main concerns.
Dekton
®
by Cosentino®
Innovation applied
design.
Dekton® is a sophisticated blend of over 20 minerals
extracted from nature. Its production process is the result
of years of research, development, and innovation in the
manufacturing of glass, state-of-the-art porcelain and
quartz surfaces.
Electron microscopy makes it possible to appreciate
the reduced porosity of the material, a consequence of
the sintering and ultracompaction process exclusive
to Dekton®. This reduced porosity and the absence of
micro-defects causing stresses or weak points are the
distinguishing features of Dekton®.