User's Manual

TROY Group, Inc.

Configuring the PocketPro USB

After the hardware setup has been successfully completed, the PocketPro

USB print server can be configured via the Ethernet connection. If you

are using a wireless print server, you can still configure it via the

Ethernet connection, or optionally configure the print server via a

wireless connection as described on Page 13.

Configuring the Print Server Using an Ethernet Connection

For Microsoft Window’s operating systems, the recommended method of

configuring one or more print servers on your network is to use the

ExtendView Utility (provided on the TROY PocketPro USB Installation

CD). For non-Windows operating systems (i.e., Macintosh or Unix

systems, etc.), a standard web browser (e.g., Microsoft Internet Explorer

or Netscape Navigator) can be used to access the configuration settings

of the print server. No additional software is required.

NSTALLING THE EXTENDVIEW UTILITY (WINDOWS OPERATING SYSTEMS):

1. Ensure your PC is connected and has access to your network.

2. Connect an available Ethernet cable from your network hub to the

PocketPro USB print server. Ensure the print server is powered on.

3. Insert the CD supplied with your print server into the CD-ROM drive

of your computer. The CD should automatically start and display a

menu screen. Click on Install Software.

4. Select TCP/IP Management Utilities, and then click on Next.

5. Select ExtendView, and then click on Install.

6. Start the ExtendView utility by clicking on Start, Programs, TROY

GROUP Printing, and then ExtendView.

7. When the Welcome screen appears, click on Next, choose any name

for your View Name, select Automatically create a view with default

settings, and then click on Finish.

NOTE: No configuration is necessary for Macintosh users unless

have the wireless version, in which case

ou will need to confi

ure the

wireless settings of the print server.