User's Manual

User’s Guide
Document #40171-120 Rev. AX1 13
First-Time Configuration of the Wireless Print Server
To configure the PocketPro USB Wireless print server for the first time
from a computer via an 802.11b wireless connection, you will need to
temporarily change the settings on your computer to match the default
settings of the print server as follows:
 Wireless Mode: Ad-Hoc (sometimes referred to as Peer-to-Peer)
 Channel: 11
 SSID (or wireless network name): printer
You should now be able to configure your print server using either the
ExtendView Utility or the Web Browser Configuration as described in
the previous sections.
NOTE: Be sure to set
y
our PC back to its ori
g
inal wireless settin
g
s
after
y
ou finish confi
g
urin
g
the PocketPro USB Wireless
p
rint server.
NOTE: For detailed information on usin
g
the WebXAdmin Utilit
y
,
refer to the TROY PocketPro USB Administrator’s Guide (provided in
PDF format on the TROY PocketPro USB Installation CD).
NOTE: It is not necessar
y
to chan
g
e
y
our computer’s settin
g
s if
y
ou
are configuring the print server’s settings via an Ethernet connection.
NOTE: Refer to the wireless securit
y
addendum (provided in print
with the PocketPro USB wireless print server and is also available
from the TROY web site at http://www.troygroup.com
) for wireless
security configuration instructions.