User's Manual

TROY Group, Inc.
28
Loading New Firmware (Macintosh OS-X)
1. If you are using the Macintosh OS-X operating system, download the
firmware file to your desktop.
2. Go to the terminal command prompt and type cd desktop.
3. Type tftp <enter the IP address of the print server>, and then press
Enter (e.g., tftp 192.168.0.4).
4. Type binary, and then press Enter.
5. At the tftp> prompt, type put <firmware file name> <password of the
print server> (example: put ppusb.bin access).
NOTE: To up
g
rade
y
our print server’s firmware from operatin
g
s
y
stems other than Windows or Macintosh, refer to the PocketPro
USB Administrator’s Guide (provided in PDF format on the
PocketPro USB Installation CD).