User's Manual

5. Click OK or Apply.
You are now ready to print. If you would like to test, you can go the General tab
and click Print Test Page and you should get a Windows test page on the printer.
Adding a Second NetBIOS Port
If you are adding a second NetBIOS printer port, do not re-run the installation
program. Instead, follow the appropriate procedure below.
Windows 95/98/ME
1. Click the Start button and select Settings then Printers.
2. Right-click on the printer you want to add the port to and select Properties.
3. Go to the Details tab, and click Add Port.
4. Select Other, highlight NetBIOS Port, and click Next.
5. Follow steps 5 & 6 above, in the Installing Port Monitor section, and click
Apply.
Windows NT/2000/XP
1. In the printers list, select the printer you want to add the port to, and click
File, then Properties.
2. Go to the Ports tab, and click Add Port.
3. Select NetBIOS port, and click Next.
4. Follow steps 5 & 6 above, in the Installing Port Monitor section, and click
Apply.
Additional Windows Configuration Methods
EtherWind print servers are also compatible with the Standard TCP/IP Port in
Windows 2000/XP and with the LPR Port on Windows NT port options, which
are built into the operating system, and with the Internet Printing Protocol.
4-6